Introducing our beautiful range of strap anchors! This listing is for these gorgeous 2cm (3/4") long-shaped strap anchors. The top ring part measures about 2cm across the internal width- which is the maximum strap width you can fit through. The bottom part allows the fabric/leather/cork etc to be seen which is an extra nice feature. The whole piece measures about 9cm long, and the top external width is 3cm, bottom external width about 2.4cm. Each piece has 3 screws on the back and a backing plate. Currently only available in this nickel-free shiny silver. But if you'd LOVE to have them in a different finish, please feel free to get in touch! 

These are made just for us according to our high standards, they're not only functional but also aesthetically pleasing, you'll love them in your creations.

You would install these strap anchors in a similar way you'd install turn locks.

Step 1: Decide on the exact position first- I personally prefer deciding on the outer bottom point and then use a disappearing pen to mark a faint line closely along the outside edges of the long sides.

Step 2: Mark on the hardware piece, the edges of screw holes with plenty of ink using a marker.

Step 3: Double check you're happy with where you'd like the strap anchor to be, and then press the strap anchor down firmly to get the screw hole marks on the material.

Step 4: Check again you're happy with the positioning of the screw holes as these will determine where your strap anchor will end up.

Step 5: Once happy with positioning, you can use a hole punch (4mm) to make holes for the screws

Step 6: Gather up the backing plate and screws to put everything together! Make sure the strap anchor goes in front of the right side of your fabric, and the metal screw holes peek through the holes in the material, and then align the backing plate, and finally put the screws firmly in.

Step 7: Iron on a piece of thick fusible interfacing scrap to cover the backing plate and screws- this is important as it will protect the inside structure of your bag very well.

Step 8: Your strap anchor is installed!

Choose from Packs of 4 sets or 20 sets! With the Pack of 20, a discount of 20% off has already been done for you before the bulk discounts and any other special offer- which means, yes, you can possibly take advantage of the Pack Discount, Bulk Discount (automatically done in cart), any valid coupon code AND our generous Free Shipping offer!

*DISCOUNTS FOR BULK BUYS ARE AVAILABLE, DIFFERENT ONES FROM THE SAME LISTING WILL ALL COUNT TOWARDS IT*

Below are the available bulk discount rates for each individual item when you purchase a certain amount (each unit is your chosen pack size):

• Buy 3 - 6 and get 5% off
• Buy 7 - 10 and get 10% off
• Buy 11 or 19 and get 15% off
• Buy 20 or above and get 20% off